Woolsafe Approved water-based fluorocarbon carpet and upholstery protector and anti static treatment. Highly concentrated formula protects against both oil-based, water based and dry soils.Suitable for use on wet cleanable carpets and upholstery. Can be applied immediately after wet cleaning.

Fluorocarbon carpet & fabric protector treatment
Protects against water-based, oil-based and dry soils
Built-in anti-static treatment
Woolsafe approved
5L covers up to 90 metres of carpet
Costs under 50p per square metre

Directions: For best results, extract with an acidic rinse during cleaning, or mist with acidic rinse before applying protector. Apply using pump-up sprayer fitted with 8002 nozzle. For medium pile carpet apply 1L of new formula ready-to-use Gard-X per 15 metres of carpet. For low profile carpet apply 1 litre per 18 metres of carpet. For thicker/higher density carpet apply 1 litre per 12 metres of carpet. For professional use only. Always pre-test before use.

Excellent water-based carpet and upholstery protector. Highly concentrated formula that protects against oil-based, water based and dry soils.

Dilution rate can be altered depending on the job in hand. Dilute with more or less water depending on the pile densisty, thickness, fibre type, dampness of the item being protected. Dilute only with sufficient water to cover/penetrate the fibres - thus reducing drying times and giving the operator more control. As a starting guide, dilute 4:1 for carpets and 2:1 for upholstery.

Each litre of concentrate covers approximately 25 square metres of carpet (5 litres of concentrate covers around 125 square metres). Very economical at just over 50p per square metre.

For best results, extract with an acid rinse during cleaning, or mist with acid rinse before applying protector using a pump-up sprayer. 5L

Top quality, odourless fluorocarbon carpet protector which coats and protects fibres against water and oil based spillages. Exclusive formula contains stain blocker additive for re-treatment of stain resistant nylon carpets and also helps protect against static electicity.

Apply by Prochem carpet protector applicator to new carpet or after extraction cleaning. White liquid. Coverage approx. 30m2 to 50m2 per 5 litres. Ready-to-use pH 5. 5 litres.

Solvent based protector for the treatment of water sensitive fine fabrics. Fabric Seal should be applied by approved solvent applicator with suitable respiratory protection. Contains hydrocarbon solvent and fluorochemical protector which helps prevent staining from both water and oil based stains. Clear solvent. Coverage approx. 80 to 100m2 per 5 litres. Ready-to-use HARMFUL May cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking. 5 litres.